Email liên hệ:

info@systech.vn

Hỗ trợ dịch vụ:

+84(0) 83 383 1313

Pinnacle® 3000

Pinnacle® 3000
Pinnacle® 3000

In both process and bias applications, the Advanced Energy (AE) Pinnacle® 3000 DC power supply provides the highest efficiency and power factor available, resulting in the lowest operating and installed cost in the industry. Remarkable Pinnacle process consistency and control deliver the additional benefits of significantly reduced variation and higher yields—all from one exceptionally compact unit
Model: Pinnacle® 3000
Nhà sản xuất: Advancedenergy

Features

Highest efficiency and power factor in the industry

Compact—3000 W in a 2-U, ½-rack package Wide, single tap

Profibus and RS-232 serial communications

Target-conditioning cycle (TCC) —minimizes conditioning time for new targets 400 VAC input only Low stored energy—less than

6 mJ per 1 kW of output Output repeatability of ±0.1%

at > 15% power Joule mode—optimized

energy delivery Programmable limits for output level, strike voltage, and process voltage Non-volatile memory storage

of settings CE markedUser-selectable and programmable parameters put process control at

your fingertips:

• Selectable operation as a power, current,

or voltage source

• Programmable ramp/run recipes

• Programmable process limits for output

level as well as strike and process voltage

16-bit control circuitry enables the

fastest, most accurate ramp-to-set point

response available (< 1.5 ms) with output

repeatability of ±0.1% at > 15% power.

Non-volatile memory stores and

preserves recent settings in case

of a shutdown

Benefits

Proven Pinnacle® performance

and reliability

Maximum process efficiency

—lowest operating and

installed cost

Versatile—excellent in both

process and bias applications

Fast, configurable arc response

—low arc damage

Precise process control

Numerous display/control options

Safety/emissions compliant

Electrical
Input Power Specifications
Line Voltage  400 VAC ±10%; 3 φ, 4 wire, 50 to 60 Hz, no neutral
Line Current  5 A per φ, nominal line
Line Regulation  ±1% for a 10% line voltage change or a ±2% frequency
change
Overcurrent Protection  10 ADC bus fuse
Output Specifications
Output Power  3 kW
Output Voltage  370 to 1000 VDC full-power output
Output Ripple Voltage  Component of output ripple voltage related to input line
frequency: ±5% RMS
Efficiency  > 90% at full power
Power Factor  0.87 for loads > 0.3 kW; 0.9 for loads > 2.4 kW
Repeatability  From run to run at a constant set point:
0.1% from 15- to 100%-rated power
0.2% at < 15%-rated power
Load Regulation  ±1% for 4:1 load change within V-I limits of tap range
Output Actual to Readback
Accuracy
Serial interface ±1%
Electrical
Input Power Specifications
Line Voltage  400 VAC ±10%; 3 φ, 4 wire, 50 to 60 Hz, no neutral
Line Current  5 A per φ, nominal line
Line Regulation  ±1% for a 10% line voltage change or a ±2% frequency
change
Overcurrent Protection  10 ADC bus fuse
Output Specifications
Output Power  3 kW
Output Voltage  370 to 1000 VDC full-power output
Output Ripple Voltage  Component of output ripple voltage related to input line
frequency: ±5% RMS
Efficiency  > 90% at full power
Power Factor  0.87 for loads > 0.3 kW; 0.9 for loads > 2.4 kW
Repeatability  From run to run at a constant set point:
0.1% from 15- to 100%-rated power
0.2% at < 15%-rated power
Load Regulation  ±1% for 4:1 load change within V-I limits of tap range
Output Actual to Readback
Accuracy
Serial interface ±1%



0833831313