Email liên hệ:

info@systech.vn

Hỗ trợ dịch vụ:

+84(0) 83 383 1313

DC POWER SUPPLIES LOWEST STORED ENERGY

DC POWER SUPPLIES LOWEST STORED ENERGY
DC POWER SUPPLIES LOWEST STORED ENERGY

Pinnacle Series DC Magnetron Power Supplies The field-proven Pinnacle® platform of DC power supplies delivers remarkable process consistency and control for significantly reduced variation and higher yields. This compact, versatile package offers the lowest stored energy, fastest arc response, and widest full-power operational impedance range in the industry. These unprecedented capabilities, combined with superior efficiency and the highest power factor available, deliver process benefits you can bank on.
Model: PINNACLE SERIES
Nhà sản xuất: Advancedenergy

Product Highlights

 Lowest operating and installed cost

 Fastest arc response in industry — least arc

damage

 Configurable arc response

 Maximum process efficiency

 Precise process control

 Compact, versatile package

 Numerous display/control options

 Safety/emissions compliant

 Lowest stored energy — less than 1 mJ per 1 kW

of output

 No tap changes

 6.25:1 impedance range

 Target conditioning cycle (TCC) — minimizes

conditioning time for new targets

 Output repeatability of ±0.1%

 Joule mode — optimized energy delivery

 Programmable limits for output level, strike

voltage, and process voltage

 Non-volatile memory storage of settings

 Compact, 3U (128 mm, 5.25") chassis

 200 kW of output in a 30U (1280 mm, 50") rack

 CE and CSA marked

Product Specifications 

Electrical
Input Voltage  200/208, 400, or 480 VAC (all ±10%)
3, 4 wire, 50 to 60 Hz, no neutral required
Efficiency  >87%
Power Factor  >0.90 for loads > 2 kW
Output Voltage  Low-Z and standard-Z options (please refer to individual specification information)
Output Polarities  Floating default with positive and negative capability
Output Ripple Voltage  The component of output ripple voltage related to input line frequency is <2% RMS
Output Power Repeatability  0.1% from 10% to 100% of rated power (from run to run at a constant set point)
Remote Panel or Host Port  ±1% of full-rated output
User Port  1% or ±0.2% of full-rated output, whichever is greater
Line Regulation  No accuracy derating for line voltages within the specified input voltage range
Load Regulation  No accuracy derating for impedances within the specified output impedance range
Temperature Coefficient  <0.005%/°C variation in the regulated output parameter over 20° to 40°C (68° to 104°F) ambient
temperature range
Product Line (Overall)  Specification accuracy is Cpk <1.5

 

Electrical
Input Voltage  200/208, 400, or 480 VAC (all ±10%)
3, 4 wire, 50 to 60 Hz, no neutral required
Efficiency  >87%
Power Factor  >0.90 for loads > 2 kW
Output Voltage  Low-Z and standard-Z options (please refer to individual specification information)
Output Polarities  Floating default with positive and negative capability
Output Ripple Voltage  The component of output ripple voltage related to input line frequency is <2% RMS
Output Power Repeatability  0.1% from 10% to 100% of rated power (from run to run at a constant set point)
Remote Panel or Host Port  ±1% of full-rated output
User Port  1% or ±0.2% of full-rated output, whichever is greater
Line Regulation  No accuracy derating for line voltages within the specified input voltage range
Load Regulation  No accuracy derating for impedances within the specified output impedance range
Temperature Coefficient  <0.005%/°C variation in the regulated output parameter over 20° to 40°C (68° to 104°F) ambient
temperature range
Product Line (Overall)  Specification accuracy is Cpk <1.5



0833831313